How do you weigh cooked food and divide it into portions?
Once the whole pot has been weighed, a portion of that dish is found not by guesswork but by division. It is far more consistent than going by the ladle.
In a dish cooked in a pot, the portion is usually found with the ladle, and the ladle carries a different amount every time. Yet once the whole pot has been weighed, a portion is found not by guesswork but by a single division — and this is done once for each dish.
Why start from the total?
In a pot of food, very little can be measured item by item. While cooking, ingredients absorb water, release water and blend into one another; raw measures have no direct counterpart in the cooked dish.
The total weight, however, is a single number and is measured after cooking is finished. Everything inside, including the water lost, is within this number.
A portion found with the ladle depends on two variables: the size of the ladle and where it dips in. A ladle dipping in from the top and one dipping in from the bottom do not carry the same dish.
How is the tare used?
The process consists of two weighings. First the empty pot is weighed and this number is noted once; because the same pot weighs the same every time, this measurement is not done again.
After the food is cooked, the full pot is weighed. The difference between the two numbers is the net weight of the dish.
If the scales cannot take the pot, the method changes: as the food is transferred to a serving dish, the dish is tared and read once it is full. The result is the same; only the order differs.
How is it divided?
The net weight is divided by the number of portions the pot is planned to make. If a dish of 2,400 grams is planned as six portions, one portion is 400 grams.
The number of portions here is a decision, not a measurement. How many people will eat how many meals is set at the start; if the number changes, the portion changes too.
Nor is the job done once the division has been made: the real gain is seeing once which container those 400 grams match. On later occasions, that container is used, not the scales.
Which dishes does it work for?
It works best for mixed, liquid dishes: pot dishes, soups, mixtures of vegetables and meat. In these, measuring item by item is not possible anyway.
In dishes made of pieces, it is not needed. Köfte (Turkish meatballs), chicken pieces or fish slices can already be counted; there the portion is found by number.
For oven dishes there is a middle way: the tray is divided by cutting. In a tray cut evenly, the portion is found by geometry, with no need for scales.
What gets missed when dividing?
The first thing missed is that the dish is not uniform. In a meat dish, a ladle taken from the top carries more liquid and one taken from the bottom carries more body; the dish is stirred before dividing.
The second is the part left in the pot. The amount left at the bottom and sides of the container shows on the scales but does not reach the plate; that is why the calculation is a rough approximation.
The third is what is added afterwards. Yoghurt, olive oil or lemon added after the food is on the plate is outside this calculation and is considered separately.
Once, or every time?
This process is not repeated at every cooking. When the same dish is cooked with the same recipe, the total weight comes out close; the portion equivalent measured once holds on later occasions.
The only situation in which it needs repeating is when the recipe changes. When the amount of an ingredient or the cooking time changes, the total changes too and the division is done again.
This equivalent, once worked out, is directly useful in batch cooking too. When dividing into portion-sized containers, how much each container should take is known, and the division is done not by guesswork but by filling.
That is why the real output of the method is not a number but a container. Once the measure has settled into the container, the scales go back in the drawer and stop being a step in the kitchen.
Personal decisions on amounts and restrictions linked to a health condition are discussed with a dietitian and a doctor. This content is prepared to support general nutrition literacy; it does not replace medical diagnosis or treatment.
General information notice. This content is prepared to support general nutrition literacy; it does not replace medical diagnosis or treatment and is not personal nutrition advice. A plan tailored to you can only be prepared by a licensed dietitian; if you are pregnant, have a chronic condition, take regular medication, are feeding a child, or have a clinical condition, a physician and dietitian check is required before starting a plan.
Find a DietitianYou may also find these useful
Other guide pages close to the same topic.
Do sucuk and salami count as a meat portion?
On the breakfast plate they seem to take the place of meat. The Türkiye Dietary Guidelines (TÜBER) count them not in the meat group but among optional choices, and give their serving measure separately.
Rewriting a recipe with your own measures
When a recipe works the second time, the job is considered done; yet the real gain is rewriting that recipe with your own container, your own hob and your own portion.
Can you weigh a whole recipe in a single bowl?
If the tare button on the scales is used once more after each ingredient, a whole recipe goes into a single bowl, each part measured separately. Measuring cups and washing-up both disappear.
How much of the oil and sauce left in the pot reaches the plate?
The amount put into the pot and the amount that reaches the plate are not the same. Instead of guessing the difference, there is a simple way to measure it once.